How to Build a Party in Chaos Zero Nightmare: Action Points and Draws in a Rossweisse Deck
Deck building

How to Build a Party in Chaos Zero Nightmare: Action Points and Draws in a Rossweisse Deck

KUKJIN LEE·November 20, 2026

If you have Rossweisse and Tiphera but not Fei, who should fill the third slot? If you can’t draw Sword Resonance and your turn stalls, Veronica’s card draw is welcome. If you have cards in hand but not enough Action Points to play them, Mika’s Source of Water is more pressing. In either case, Rossweisse’s attack gets delayed, but the support you need is different.

When choosing three combatants in Chaos Zero Nightmare, start by looking at what was in your hand when you wanted to use your main card, and how many Action Points you had left. Even with the same Rossweisse, three Sword Resonance cards with reduced costs can cut the cost of setting up by 3 in one turn. The party’s weak spot can change without swapping out a single character.

The card Rossweisse wants to play last

Rossweisse’s Flicker Blade splits into Light and Dark and sits at the two ends of your hand. Play other cards between them to trigger effects, then meet the conditions to combine the two pieces again. The fun of this combatant is figuring out what to do with the cards in hand until the swords combine. Drawing one main card quickly doesn’t mean you’re ready to attack.

In particular, Flicker Blade (Unbound) is an X-cost card whose damage scales with the Action Points (AP) you have left. So AP has two jobs in this deck: you need it once to play setup cards, and again to make a big attack after the swords combine. Even if an ally lets you play every setup card in hand, having little AP left means the second job is still undone. For decks that use other Flicker Blade Epiphanies, use criteria suited to those cards’ effects.

This also explains why you might pair a damage dealer with two supports. One ally brings the cards you need into your hand, while the other provides AP to play them and AP to save for the attack; both contribute to the same Flicker Blade. On the other hand, if your main card is already coming up on time and you still have AP left, a sub-DPS who can use that extra AP to add more damage is a good choice. What matters is whether the third combatant has something useful to do that turn.

Why does the setup cost come out to 6 in one deck and 3 in another, even though both have eight cards?

Let’s count the cards in two Rossweisse save files. Both have eight cards, including four copies of Sword Resonance. In the first, all four copies cost 1 AP. In the second, three of them have reduced costs and now cost 0 AP. Assuming the rest of the fixed-cost cards are the same, here’s the math.

Cards played onceBefore cost reductionAfter cost reduction on three Sword Resonance cards
Four Sword Resonance cards1+1+1+1 = 4 AP0+0+0+1 = 1 AP
Radiant Sword Flow and Blade of the Cycle1+1 = 2 AP1+1 = 2 AP
Total fixed cost of setup cards6 AP3 AP

The 6 and 3 in the table are the sums of the numbers shown on the setup cards. This doesn’t include the X you put into the final Flicker Blade, AP an ally restores along the way, or the order in which you draw cards. If you start with 3 AP and assume you play all the setup cards in the table in one turn, the first deck needs 3 more AP just for setup. The second can cover its setup costs exactly, but playing all those cards leaves 0 AP.

That difference matters when choosing your next ally. Even if the first deck draws well and all four Sword Resonance cards reach your hand, you may still be stopped by their cost. The second deck can empty the same hand more easily, so you may prefer someone who helps you draw setup cards on time or strengthens your final attack. If you still want to put lots of AP into Flicker Blade, though, AP support can be worthwhile even with the second deck.

What if only one Sword Resonance card has reduced cost? Using the same assumptions and calculation as the two examples, setup costs 5 AP. You don’t have to give up on the whole party just because your save file differs from the completed example by three cards. Subtract the cost reductions on your own deck to see how far you can follow the same approach with the same ally.

An ally who provides AP versus one who reduces card costs

An illustration of Tiphera holding a golden triangle, captioned “Action Points and Buffs”

Mika can provide AP with Source of Water. Tiphera can generate AP and apply an attack buff by using Archetype cards. For example, both are worth considering if Rossweisse’s setup cards are easy to draw but the party is always short on AP right after combining the swords. If you also need healing, consider how much Mika’s healing will help. If you want a buff on your final attack, consider whether you can time Tiphera’s Archetype cards for that moment.

Effects that reduce the cost of cards in your hand are another option, such as Narja’s Infinite Hunger. For example, if a 1-AP setup card gets discounted and you play it, you can save that 1 AP for Flicker Blade. But if the effect applies to random cards in your hand, there’s no guarantee the card you wanted to play this turn will get the discount. And once you’ve played all your setup cards, there may be few chances left to save AP by reducing their costs.

That’s why it helps to picture your hand at the moment you want to use Flicker Blade, even if both allies look like “AP support” on the party screen. A hand with several 1-cost setup cards and one with only Flicker Blade left get different value from a single cost reduction. Check when a support effect activates to avoid swapping allies only to find your turn stalling at the same point.

What kind of card draw do you need in the third slot without Fei?

Take a Rossweisse, Tiphera, and Fei party as an example. Fei has two roles: drawing cards with Poison Mist and boosting X-cost effects with a particular Epiphany of Nightlong Rain. The latter requires you to meet a sequence condition. You have to play a Fei card first, then follow it with Nightlong Rain to give the next X card a one-time bonus. That’s why Fei is such a good fit for Flicker Blade (Unbound) among combatants who fill your hand.

Without Fei, you can judge Adelheid and Veronica by the same criteria. Adelheid has a setup that cycles cards by applying Blessing. If your save file has AP gain on Protect Us, she can keep the draws going while also helping with costs. If you want your party to make use of Blessing or help you survive, she can fill several roles in one slot. The tradeoff is that you lose Fei’s X bonus, so you can’t expect the same damage from the same hand.

Veronica is worth considering when the cards you need arrive late. For example, her Sir Kowalski card has a variant that draws two cards. If your party already has enough AP, those two draws might find Sword Resonance or another way to draw and keep your turn going. But if you have cards to spare and are only short on AP, adding Veronica may just leave you with more cards you can’t play. That’s why it’s hard to rank the three candidates in a single list. Along with who you’re replacing, consider what effect you regain with that swap.

The number of cards in your deck isn’t the number you need to draw each turn

Seeing eleven cards in your save file doesn’t mean you need an outside source to draw eleven cards every turn. First, set aside upgraded cards and Exhaust cards that, once used, won’t be drawn again during battle. You need to account for them until they’re in your starting hand and played, but after they’re cleared, they aren’t like cards that keep cycling back. Cards already in your hand, like Rossweisse’s Light and Dark, should also be counted separately from cards you need to find in your deck each time.

Next, check how many cards come back into your hand after you play one. Ignoring other effects for a moment, if you play one card and draw one, your hand size stays the same. But you’ve still seen one more card from your deck, so you’ve made progress toward finding Sword Resonance. If you play one and draw three, your hand grows by two. If that costs 1 AP, don’t count the larger hand as though it also gave you more AP. And if an effect only draws “your cards,” it can’t count as a way to find another combatant’s setup cards.

It’s also worth looking at the first turn and the next cycle separately. If a card that starts your draw engine is near the bottom of the deck, your first turn can be short even when the deck has plenty of draw overall. Conversely, a deck that clears several upgraded cards early may be more likely to draw the cards it needs together in the next cycle. In that case, adding another permanent draw ally and simply changing your first-turn setup order are different solutions. When adjusting your party, look for a recurring stall at the same point rather than one hand that happened to work well.

If you’re only swapping one ally, start with the hand you ended your turn with

A stalled turnWhat to fix first with one slot
Sword Resonance is still in hand, but AP is depletedGet AP earlier or reduce the cost of setup cards
You have AP left, but the card you need is still in the deckAdd card draw that can find it
You’ve combined the swords, but have little AP leftSave AP for Flicker Blade (Unbound) and consider support for its X effect
Your health runs out before you finish setting up your attackAdd an ally who can provide healing or defense

If you’re building a Rossweisse party without Fei, Adelheid and Veronica are good first draw options to consider alongside Tiphera. But if Sword Resonance stays in your hand while your AP hits 0, that draw slot may not be what needs fixing right now. Pick one card you wanted to play next turn but couldn’t. Whether it never reached your hand or you had it but couldn’t afford it will make it much clearer which of your available combatants should take the third slot.