NIKKE: How Sky’s 35-second Pierce buff works and whose ATK sets the penalty
Nikkes

NIKKE: How Sky’s 35-second Pierce buff works and whose ATK sets the penalty

KUKJIN LEE·November 18, 2026

If you’re considering Sky as a partner for a Pierce damage dealer in GODDESS OF VICTORY: NIKKE, keep an eye on the 35-second mark after using her Burst. Until then, your allies’ Pierce damage is increased. But Sky’s Burst takes 40 seconds to become ready again by default. Without help from another effect, the Pierce damage buff expires, and your allies’ ATK is reduced instead. In other words, her kit includes both a window of increased power and one of reduced power.

When Korean players talk about Sky’s ATK penalty, the shorthand refers to an ATK reduction based on the caster’s ATK. Sky is the caster. Her teammates receive the effect, but Sky’s own ATK sets its size. The figures below assume skill level 10.

When Full Burst begins and when Sky uses her Burst

Sky is an Elysion Iron Code Supporter who wields the sniper rifle Jet Stream and is a Burst I Nikke. Her ATK support has two distinct triggers. The first is when the team enters Full Burst. At that moment, Skill 2 activates and increases all allies’ ATK by 20% of Sky’s ATK for 10 seconds. Since the condition is “when Full Burst Time begins,” this effect can also trigger when another Burst I Nikke starts the chain.

The second trigger is when Sky uses her own Burst, “FLY! ROCK!” She grants all allies High Tension, increasing their Pierce damage by 15% for 35 seconds, and increases her own ATK by 50% for the same duration. The Pierce damage boost for allies and the ATK bonus for Sky herself apply to different targets.

What happens in battleEffect on all alliesEffect on Sky only
Team enters Full BurstATK increased by 20% of Sky’s ATK for 10 seconds—
Sky uses her BurstPierce damage increased by 15% per stack of High Tension for 35 secondsATK increased by 50% for 35 seconds
High Tension endsATK reduced by 10% of Sky’s ATK for 20 seconds due to Low TensionIf Sky is in Low Tension, she is stunned by Low Energy for 20 seconds

There’s one thing to keep in mind when running two Burst I Nikkes and alternating between them. Another Nikke can start the chain, allowing the team to enter Full Burst again. This also triggers Sky’s Skill 2 ATK support. However, Sky herself hasn’t used her Burst again, so High Tension’s 35-second timer keeps ticking. That’s why the Pierce damage buff can expire even in a team with a smooth Full Burst rotation.

To reach 45% Pierce damage, you need to reapply the buff within 35 seconds

Each time Sky uses her Burst Skill, allies gain 15% Pierce damage. The “3 stacks” listed in the skill table is the maximum. The effect must be reapplied before it expires to reach 2 or 3 stacks, and the value reaches 45% at 3 stacks. If you assume the team’s total damage increases by 45% as soon as the battle begins, your expectations will already be off starting with the first Burst.

Let’s treat the moment Sky first uses her Burst Skill as 0 seconds. Without cooldown reduction or help building stacks, High Tension expires at 35 seconds, and her Burst Skill won’t be ready again until 40 seconds. That 5-second gap is the difference between the base cooldown and the buff duration. Low Tension, which reduces allies’ ATK, is listed separately with a duration of 20 seconds. So you can’t count only the 5 seconds until the next Burst button lights up as a loss.

Even when adding an ally who reduces cooldowns, focusing only on how many seconds they shave off can make you miss one key factor. For example, suppose a support effect readies Sky’s Burst Skill at 33 seconds. If the team doesn’t fill the Burst Gauge and open her turn until 36 seconds, the previous buff will already have expired—even though her icon lit up earlier. By contrast, you can start considering stack uptime if she actually uses her Burst Skill again before 35 seconds. When comparing team compositions, track the cooldown shown in the skill window and the actual time elapsed from the first activation to the next.

The targets affected by Pierce damage also matter. High Tension grants allies a Pierce damage bonus. That doesn’t mean every shot they fire becomes a Pierce attack. If a Pierce DPS can hit multiple boss parts with one attack, how many such attacks land while the buff is active becomes important. On the other hand, if the team’s main attacks don’t have Pierce, there are fewer ways to make use of that time—even if you manage to maintain the same 35-second duration.

Whose ATK determines the 10% penalty?

When High Tension ends, Skill 2 inflicts Low Tension on all allies. The listed effect is reduces ATK by 10% of the caster’s ATK for 20 sec. It’s easy to read this as each DPS losing 10% of their own ATK, but the calculation is based on Sky’s ATK. For example, if Sky’s ATK used in the calculation is fixed at 100,000, the reduction is 10,000. Using the same reference value, the 20% increase at the start of Full Burst would amount to 20,000. These figures are examples to help explain the effects; actual damage also depends on the target and battle conditions.

You can’t simply subtract the 10% reduction from the 20% increase and call it a “constant 10% gain.” The increase applies for 10 sec when Full Burst begins, while the reduction applies for 20 sec when High Tension ends. Even against the same boss, the time your main DPS can attack depends on which effect is active when a part is exposed. That’s why it’s worth distinguishing between fights that end during the first buff window and fights where attacks continue after the buff wears off.

Stun is a separate condition that applies to Sky. She is stunned for 20 seconds while in the Low Tension state. The effect shared with her allies is reduced ATK. If you’re also relying on Sky for the next Burst I rotation, you’ll need to consider both her cooldown and whether she can act at that point. It also matters who will fill the open slot when you add another teammate.

Where to spend the 1 second after Full Charge

An image recreating a scene from the official animation. Sky is shown behind cover, alongside the text “1 second after Full Charge, immunity three times.”

Skill 1’s condition is to maintain Full Charge for at least 1 second. This doesn’t mean that 1 second has passed since you started aiming. You have to wait 1 additional second after the charge gauge is full before firing. When this condition is met, if Sky doesn’t have “Resistance Spirit,” she grants it to all allies, blocking one harmful effect. It lasts for 5 seconds, and this immunity effect can activate up to three times per battle.

There are three separate limits here. 1 is the number of harmful effects a single application of immunity can block, 5 seconds is how long you have for an effect to come in, and 3 times is the number of times immunity can be applied in one battle. For example, if the debuff you want to block comes in 8 seconds and you activate immunity now, the 5 seconds will have passed by the time you need it—even if no other effect comes in first. Conversely, even within those 5 seconds, if another harmful effect comes in first and consumes the immunity, it won’t block the effect that follows.

Maintaining Full Charge for the same duration grants Sky Pierce and a 60% increase to Pierce damage for 40 seconds. This effect doesn’t list the immunity’s limit of three times per battle. The catch is that meeting the condition early for personal damage also uses an opportunity to activate immunity while the condition is met. In a battle where a powerful debuff comes in later, you’ll have to choose whether to take the personal Pierce buff early or save an immunity activation for when it’s needed.

You could also try applying Resistance Spirit just before High Tension ends to prevent Low Tension. However, the skill descriptions don’t specify the order in which her immunity handles Low Tension and Stun. When assessing the value of this combination, it’s better to start by considering how important a reliably timed immunity activation is in your battles, rather than assuming you can avoid the penalty every time.

If you mostly play on auto, you can’t count on it doing what’s possible manually. This is especially true if you’re looking for an Arena immunity unit: you can’t assume she’ll keep aiming herself and activate immunity at the moment you want. Simply classifying her as a character with immunity doesn’t tell you whether Resistance Spirit will be on your team when the opponent’s first disruption lands.

If you’re considering recruiting her, look ahead to the scene after the first Burst.

If Sky’s expected role is to “make the most of a main Pierce DPS’s one attack window,” start by checking whether that attack lands during the first 35 seconds of High Tension. In a team that aims to win within that window, there’s a use for the initial 15% even without reaching max stacks. In a boss fight with multiple Full Bursts, though, the following 20 seconds may matter more. The value of her slot also depends on whether Low Tension is active when your DPS needs to attack, and whether another Burst I Nikke can keep the rotation going during that time.

From after maintenance ends on November 19 through 4:59:59 AM on December 3, you can temporarily add Sky to your squad at the Union Shooting Range. If you’re testing her Pierce support before recruiting her, use your usual DPS and keep the battle length the same, then note the timing of Sky’s first and second Burst Skills. Also check whether the High Tension icon disappears in between and when your main attacks land; that can reveal differences a total score alone won’t show. Times are Korea Standard Time (KST, UTC+9).

It’s easier to justify spending recruitment resources on Sky when you can point to when your DPS needs to land a Pierce attack or which one harmful effect your team absolutely needs to block. If neither situation comes to mind, there’s little reason to rush this pickup just because the skill table shows up to 45%.